Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this case you'll need locate some plastic spacers that assist the new pane to fit correctly into the frame of the window repairs.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any shards will fall on the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

It's a great idea tape the gap once the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the door and the window is significant, you may need to consider security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window that is sliding. To accomplish this, you'll need open the window so that you can access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

UPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial fitting. The corners of the sash should be aligned with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is crucial to take action if you wake up every morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window repairs near me. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and blow open with a breeze It could be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, like all mechanical parts, they will wear out over time. Changing a window repairs hinge is an easy process, but it's easier with someone else to assist in holding the frame up.

Check that the uPVC hinges are closed and open in the correct direction. You can do this by looking for the arrow on each hinge, this indicates which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, creating an opening where the sash meets frame. If they're beyond repair, it might be necessary to get them re-aligned. The interlock may be misaligned. This is located on the hinge's side and might require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!

With a bit of regular maintenance and repair your windows made of upvc will provide excellent insulation and security for your home. However, it is important to recognise that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc you should consult a professional immediately.