double glazed window repairs near me Glazed Windows Repairs

There are a variety of reasons your double-glazed windows could require repair including condensation between panes to dropping or sagging frames. Fortunately, the majority of problems can be addressed.

Try applying lubrication to the hinges, handles and mechanisms of your door or window when it is difficult to open. This is usually a low-cost, short-term fix.

Broken Panes

If a window pane is broken and shattered, it loses its insulation properties and could cause draft. If the dividing muntins also broken, it could cause moisture to leak between the glass panes, leading to condensation, mould and mildew and making your home less efficient in energy use. A damaged window repairs near me should be repaired by an expert to ensure that you get the correct seal and maximum energy efficiency.

The first step is to remove any broken glass. Begin by placing a protective drop cloth underneath the window that has been broken and cutting around the edges of the pane using an inexpensive glass cutter (available in a majority of hardware stores). Before starting, you should grease the cutter of this tool with an oil that is light. This will prevent the glass from breaking too easily. The ball-shaped tool can be used to loosen the pieces. They should fall off quite quickly.

Once the glass is removed, scrape off any old glazing compound from the recess of the frame. This will expose the glazier's point and metal clips that hold the pane in the frame. If there's evidence of corrosion, the clips must be replaced with new ones. If the window is constructed of wood, the glazier points can be reused if still in good shape.

The next step is to prepare the surface of the remaining frame for reglazing. Apply a continuous strip of compound to the recess using the caulking tool. Use a high quality putty, such as Glazier's compound in cartridge. Dry it out before installing the glass. Install the metal clips if they are attached to the frame. Finally, put back the divider muntins.

Condensation

Condensation is a concern for double-glazed windows, particularly during the winter. It's typically caused by excessive moisture in the house, with warm air meeting cold glass, which forms into water droplets and settles in the corners of your windows or across the frame. You can avoid this by opening your windows more frequently, improving ventilation with extractor fans, and running dehumidifiers. If condensation remains an issue, it's best to contact an expert to determine the root of the issue. You can then fix or replace your windows if needed.

Condensation on a double-glazed window is a sign the seal has failed. The seal that is applied by the factory could wear away over time and allow cool air to pass between the panes. This can lead to fogging of the window, and eventually mold growth if not dealt with promptly enough.

A hairdryer can be used to get rid of excess moisture. However, this is only a short-term solution and should be only used as an option last option. If you let the condensation sit for too long, it may cause dampness or mould in your home. This issue should be dealt with by an expert.

Professionals can reseal double-glazed windows for a more permanent solution. They'll remove the affected pane of glass, then clean the gaps and pipe into hot air to evaporate any remaining moisture. In this process, they'll also examine for any damage, mould or mildew growth, and then apply a draught-proofing treatment to ensure your windows are fully efficient and energy efficient again.

Draughts

The rubber seals wear down over time and create drafts between the two panes. This is often a simple problem that can be fixed by replacing the gaskets and this will result in a solid and airtight seal. This will keep warm air inside your home, and the colder air outside, saving you money on your energy bills.

Misted double glazing indicates that the seals inside your sealed unit (sometimes called a DGU) have blown. The unit is comprised of two glass panes filled with argon separated by a spacer, creating an airtight window. If the seal has blown it will allow water vapour to pass through your home through the gap, causing condensation between the panes that cannot be wiped off.

This is a simple problem to solve, and windows can be quickly repaired by professionals using the right tools. The professional will employ an instrument that is designed to push in the new seals. This is typically faster than doing it by hand. These tools feature an edge that can be used to push seals into corners.

A professional might be able to reseal your windows by drilling a small hole in the window, and adding a desiccant or putty. This can be a more cost-effective solution than replacements and will provide a reliable protection against draughts for your double-glazed windows.

Faulty Hinges

Misted double glazing is a typical problem that many people encounter. This can be caused by cracked or broken glass or frame or even a damaged seal. The good news is that it can often be repaired. It is usually a matter of creating a seal between two glass panes. The new seal will prevent condensation, draughts, and leaks.

If you spot any issues, you should contact the company that sold you the windows. Make sure to put this in writing, and ask them to confirm that they've received your message. Making sure that everything is in writing will be helpful later if any disputes arise, since it will be easier to prove that you actually complained.

In some cases, a window repair specialist will drill the gap in your windows to draw out moisture and create an entirely new seal. This is only temporary and won't stop moisture from returning. Alternatively, it may be possible to replace the glass unit itself, which will ensure it is watertight.

Be aware that you should only attempt DIY fixes if your skills and knowledge are adequate. Super glue or other DIY solutions can result in more long-term damage. It is recommended to seek professional help in case you are unsure of what to do. You can find an expert local to you who can offer double glazing repair by entering your postcode in the search box on Checkatrade. Our tradespeople have been thoroughly vetted and screened, so you can be sure they will provide a high-quality service.

Broken Seals

Double glazed windows are secured by seals on windows or gas. Many factors can cause them to break, such as age, weather conditions and power washing. It's important to know what the symptoms are and what to do to fix them.

If a window seal is damaged it allows moisture to enter between the two glass panes and create fog. This is a common problem that can cause the window appear distorted. Once the seal fails, argon and other inert gases are emitted from the window, diminishing the glass's insulation capabilities.

A broken window seal can be fixed by replacing it with a an entirely new one by a professional glazier. However, this can be expensive and may not resolve the fog issue completely. Certain companies offer defogging services, which involve placing a special vacuum pump in the window frame to remove the moisture, leaving the glass clear. This method is not foolproof and doesn't replace inert gasses, which means that the fog could return.

If the IGU (insulated unit) is damaged beyond repair, a glazier could replace it. This is the most cost-effective option and can be a great option if you're looking for a long term solution. It is recommended to choose an option that provides warranties on replacement windows. This will ensure that any problems you may have are covered. This means that you can be at ease knowing that you'll get most out of your investment. You can also attempt to avoid this issue by choosing a premium window and following the manufacturer's maintenance instructions. This will extend the life of the window and decrease the number of repairs.