Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers in order to help the new pane fit into the window repairs near me frame.

If you plan to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any fragments of glass fall on the fabric instead of onto the floor where they can be trampled on and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a number of problems, including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can get at the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you're satisfied with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's essential to replace the seal as quickly as possible so that your upvc window repair windows remain watertight and draught-proof.

uPVC handles can also loosen up. This is often caused by screws that have been removed over time, but it could be caused by the handle mechanism wearing out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The corners of the sash should be aligned with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and wet floors. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to upvc window repair near me window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open or it opens in an ease. They can be repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical component hinges will wear out over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do when you have a person to help hold the frame up.

Make sure that the uPVC hinges are open and closed in the right direction. This can be done by looking for the arrow on each hinge, this shows which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window repair in a certain way or due to inadequate installation at the factory. Sending us photos via our website is often enough to solve the issue. We are more than happy to provide suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this causes an opening to appear where the sash joins the frame. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it could be necessary to get them aligned or replaced. The second is the interlock, which is on the hinge side of the window, can be misaligned. Again, it is possible to give them a clean but in some instances it could be necessary to have these replaced.

The next most common reason for draughts is window seals. They can become worn down or damaged over time, and will allow air to escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security for your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert immediately.