Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They do not rot or rust like aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is essential to make sure that your windows are in good working order.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame that was previously installed easily. However If you have double-pane windows that are anchored by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window repair frame.

If you plan to try to remove the window panes by yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass so that any shards fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.

It's a good idea to tape the gap once the glass is removed. This will keep water and drafts from entering your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the gap is particularly large, you may want to consider using the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window repair near me. However, over time, they are susceptible to a range of problems including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. It's important to take action when you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows to access the frame. With a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in position.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen. This is often caused by screws that have become undone over time, but it could also be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC hand. The first step is to close the window and perform an experiment fit. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if you wake up every morning to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, old caulking might need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes have no debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler with someone else to help hold the frame up.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a photo via our website and we will be happy to give you advice.

Regular lubrication of the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges, also due to wear and tear can become misaligned, this will cause gaps to develop where the sash meets the frame. If they are beyond repair, it might be required to realign them. Secondly the interlock, this is on the hinge side of the window, may also be misaligned, and again it's feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be put on the top of your windowsill. They can help keep cold air out and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows eventually become worn out, and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc window repair windows, it is always recommended to seek help from a professional as soon as possible.