Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

It is important to clean and oil upvc Window Repair windows and doors on a regular basis. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going to attempt to remove the glass panes yourself it is important to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass, so that any shards will fall on the fabric rather than on the floor, where they could be trodden under and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. In time, they could develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window so that you can access the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window repairs near me to check the fit after you have repositioned your hinges. If you're satisfied with the fit, tighten the screws until they stay in position.

If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it could also be due to the handle mechanism wearing out. It's relatively simple to repair a loose uPVC handle. First, you'll need close your window and do an experiment to ensure that it fits. The corners of the sash need to align with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

It is crucial to take action if wake up every morning to find mouldy walls and floors that are wet. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hamper your efforts to regulate the temperature within your home. Most often, upvc window repair near me window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by any DIYer who is competent. Based on the severity of the problem the old caulking may need to be removed before a new layer of caulk can be applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. It is also possible to be repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze, it may be the hinges that are at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. Changing a window hinge is an easy procedure, but it is easier to do if you have someone to help hold the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain manner or because of poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. Firstly the hinges, again due to wear and tear may become displaced, which causes an opening to appear where the sash joins the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock may also become disaligned. This is located on the hinge's side and might require to be cleaned. In certain instances, it may be necessary to replace the hinges.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

One of the most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be positioned on the top of your windowsill. These will keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is important to remember that all windows will eventually wear out and it is more cost-effective to simply replace them instead of fixing them. If you are experiencing issues with your Upvc window, it's best to consult a professional immediately.