Ghost Immobiliser Installation

Install a ghost immobiliser on your car and protect it from car thieves. Our TASSA certified system guards vehicles from hacking, key cloning and vehicle immobiliser bypass.

The system is hidden inside your vehicle's wiring loom, so it is completely invisible to anyone who looks. It works by generating pin code push sequences by using existing buttons on steering wheel, door cards and Autowatch Ghost Immobiliser Fitting the centre console.

No circuit cuts

It's not surprising that owners are concerned about protecting the car they've worked so hard to buy. But, traditional security systems like alarms and wheel locks can easily be snatched away or jumped by thieves. Ghost immobilisers, on the other hand, is a highly effective solution that is silent and isn't easily identified by modern thieves.

A ghost immobiliser or a hidden device, is a device that communicates to your vehicle's data network CAN to disable the engine. It does this without the use of key fobs or radio frequencies. It communicates with the vehicle's ECU through existing buttons on the steering wheel, dash and door panels to generate an individual pin code that only you can access. The code can be changed at any point and can be as long as 20 digits long depending on your preference. It also comes with a safe emergency code you can use should you forget your PIN.

The ghost immobiliser can be used to prevent relay boxes from transferring the signal of your car's key from within your home, which will open the doors and begin the vehicle. It also blocks advanced methods of stealing your vehicle, like OBD port hacking. The device is small and weatherproof, so it's difficult to see and even harder to tamper with.

The ghost immobiliser comes with a further advantage: it is able to be inserted into your vehicle without leaving any permanent marks. This makes it ideal for people who plan to sell their vehicle in the future. It's also faster and easier to install compared to a factory-fitted unit.

The autowatch ghost immobiliser fitting (hesys.Co.kr) Ghost, a revolutionary technology, is a new generation device that prevents thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate a unique PIN code. This is a hidden system that can be put in place without cutting any wires and does not require any additional key fobs. It can also be connected to the original ECU of the vehicle, thus preventing thieves from bypassing it with a new key. This system is TASSA certified and can be connected to an International Security Register, allowing owners to have confidence that their vehicles are secure from theft.

No RF scanning

If you've put lots of time and money into the customisation of your vehicle, you will need to secure it from theft. One method to accomplish this is to install an immobiliser. This will stop the engine from starting until you enter a unique PIN code. You can create a 20-digit pin using the buttons on your dashboard and the steering wheel. This will ensure that only you are able to drive your vehicle. It is also possible to set up a service or valet mode that will allow you to start your car for a short period without entering the PIN. This allows the technician to work on your vehicle without you being present. This is a fantastic feature for people who are looking to reduce time and autowatch ghost immobiliser fitting make their life simpler.

A ghost immobiliser birmingham immobiliser, a new generation device, connects to the CAN data network of your vehicle and utilizes buttons on the dashboard and steering wheel to create a PIN code. It is designed to be discrete without any indicators or sounds to signal it and can be installed anywhere on the vehicle without disturbing the aesthetics of your prized possession.

This stealthy device is TASSA approved and can cut down on the cost of insurance. It also has a tracking function, which can locate your vehicle even if it has been stolen. This is great if you own a rare, expensive vehicle that you've spent time and effort to customize.

The Autowatch Ghost can be used together with an iPhone application to allow you to remotely start your vehicle in the event that you forget your PIN or are not able to access the vehicle for some reason. This feature is ideal if you have to go on errands or pick up your children and do not want to risk having someone else drive your car. This feature is helpful when you need to take your vehicle in to be repaired or serviced.

The Ghost is unique in that it does not transmit or detect radio frequency which means it's not detected by thieves who use RF scanning and code grabbing technology. It is also able to protect your car against key cloning and ECU swapping, which are common methods of car theft.

There is no key to cloning

Ghost immobilisers can be an excellent way to safeguard high-end cars and prevent key cloning. They prevent your car from starting unless an additional PIN code is entered alongside the normal key fob. This makes it more difficult for thieves to steal your vehicle, and could discourage them from trying. This is a great idea if your vehicle has been heavily modified or is an uncommon model.

The immobilisers are connected to the vehicle's onboard CAN network and are completely hidden which means there is no visible indication of its presence inside the vehicle. The device is also difficult to detect by using radio frequency scanning technology or code grabbing. This means a thief would need to wait longer to take your vehicle.

To get around the system, a thief must be aware of the pin code and the location of the Ghost. But, the pin code is specific to you and may be changed as often as you want. The pin code is easy to remember, but mathematically impossible for anyone else to work out. The engineer will also have provided an emergency pin code in the event that you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It is compatible with all vehicles and can be fully customizable to match your car's look. It is also easy to use and is affordable. You can even transfer the device to a different vehicle if you switch cars during the lifetime of ownership, provided that the new vehicle is compatible with it.

The CAN bus is compatible with other security features. It can, for example detect damage to the vehicle and alert the owner. It could also stop the engine in the event that the car is damaged. The system will safeguard your vehicle from hacking as well as key duplicate. It can also detect vibrations and contact with the vehicle. Additionally, it will warn the owner if the vehicle has been moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief getting into your vehicle to disable the alarm, deactivate your key fob, or create new keys. This technology is a step up over the methods that were used by thieves to steal vehicles in the past. The CAN data networks also means that your system won't be affected when you disconnect or change your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that guards against key-cloning, hacking and copy-cat car theft. It does not utilize LED indicators or key-fobs. Instead, it uses the buttons on your steering wheel, console and door panels.

Modern thieves are able to employ diagnostics to find circuit breaks in your vehicle. They can bypass immobilisers that require a lot wiring or are integrated in the wiring. The Ghost is weatherproof and doesn't require any additional wiring. It cannot be detected by professional diagnosis tools. It can even be installed on vehicles with anti-theft systems.

Another major benefit of the Ghost immobiliser is that your vehicle can only be started by a person who has access to the PIN number and has physical access to your vehicle. This is a major advantage over traditional security systems that can be tampered with by simple cable tampering or a screwdriver.

If you forget your PIN you can easily reset it by using the emergency PIN override function on a mobile device or computer. This is useful if want to start your vehicle after leaving it in a garage or using the help of a valet parking service.

The Autowatch Ghost 2 has been certified for insurance by TASSA and is able to be installed by our authorised installers. It comes with an RFID fingerprint system that can identify parts that are not in use, which allows for the return of stolen items in the event that they are discovered. It can also be switched to'service mode' which permits the engine to start when your car is in a garage or if you have valet parking, however, you must enter your PIN code again to exit the car.